Luxumol Pro Osram LED 630W Size: 99x99cm

Luxumol Pro Osram LED 630W Size: 99x99cm

- LED Brands: Osram
- Drivers Brands: Osram Optotronic IP67 2DIM
- Coating: Special Conformal Coating for LED
- Spectrum: Full Spectrum 4K
- PPF: 1700μmol/s
- Efficacy: 2.7μmol/J
- Input Voltage: AC 220-240V 50/60HZ
- Output Power: 630W (Max. 650W)
- Power Factor: ≥ 90% /  3 Amp.
- Dimming: Knob (0-%25-%50-%75-%100) or 0-10V Signal (with Luxumol Led Master Controller max:25 - ----- Luxumol Pro Led 630)
- Beam Angle: 120°
- Mounting Height: ≥ 6’’ Above Canopy
- Operation Temperature: -40°C / 55°C
- Operation Humidity: 10%-95% RH
- Storage Temperature: -50°C / 80°C
- Storage Humidity:
- 10%-95% RH

Dimmension: 99 x 99 x 12 cm
Warranty Time: 5 years

(Watts Value are typical expected values. Tolerance allow +/- 10%range on flux and power consumption.)

CAUTION

➢  The operating voltage range of this device is AC 220V-240V. Do not operate outside this voltage range.
➢  If one or more products (max: 25 pieces) will be controlled with a luxumol led master controller, the dim potency position on the device should be EXT.
➢  This product is passively cooled design, so do not moving components and do not try to open or disassemble the fixture, unless it contain no service parts inside.
➢  Always adhere to the local rules and regulations when you use it.
➢  Gloves and safety glasses should be worn during installation and maintenance, and it should be ensured that the electrical power is cut off.
➢  Since the temperature will rise when the luminary is open, it should not be touched.
➢  Make sure the product is turned off before touching it, and allow it to cool for at least 10 minutes before touching it after it is turned off.
➢  Since the product contains special LED diodes, never interfere, it may damage the coating and the LED on it.
➢  Do not use when LED bars, drivers, power cord or plug are faulty or damaged.
➢  Keep this product away from children.